SeaLife SL6712 Sea Dragon 2500 UW Photo/Video Light Head with:
SeaLife SL6712 Sea Dragon 2500 UW Photo/Video Light Head
SeaLife's brightest and most powerful light.
The Sea Dragon 2500 uses flat panel COB LED technology to closely mimic natural sunlight, bringing out amazing colors in underwater photos and videos. With a Color Rendering Index of 90, the Sea Dragon 2500 solves the issue of blue underwater photos and videos by giving divers the ability to add light down to 200 feet / 60 meters.
The incredibly wide 120-degree beam of the Sea Dragon 2500 ensures maximum lighting coverage and is ideal for cameras with a wide field of view. With a lab verified lumen output of 2500, the light has a 60 minute burn time at full power -- making it incredibly efficient as well as bright. This head is also fully compatible with the Flex-Connect system.
|SeaLife Sea Dragon 2500 UW Photo/Video Light|
|– TECHNICAL SPECIFICATIONS –|
|Body Material:||Anodized aluminum light head with fiber-reinforced polycarbonate body|
|Light Source/Bulb Type:||1 x Vero 18 COB LED array (COB - Chip On Board)|
|Brightness:||2500 lumens (maintains 2500 lumens throughout burn time at full power)|
|Effective Range:||4 ft. / 1.2m (depends on camera model and visibility)|
|Brightness Levels:||Full power (100%), half power (50%), and quarter power (25%)|
|Button Control:||Long push (1 sec) to power light on/off; Short push cycles through 100% → 50% → 25% → 100% [repeat cycle]|
|Light Modes:||Constant light or hidden emergency signal light (activated by long push of power button)|
|Color Rendering Index:||90|
|Beam Angle:||120 degrees|
|Battery:||Lithium Ion 7.4V, 3400 mAh, 25Wh (included)|
|Battery Charge Time:||170 minutes|
|Run Time:||60 minutes at full power / 120 minutes at half power / 240 minutes at quarter power|
|Depth:||Tested to 200 feet / 60 meters|
|Dimensions:||4.8 x 2.2 x 3.8 in. (12.2 x 5.6 x 9.7cm)|
|Weight:||13.1 oz. (371g)|
|Bulb Life:||35,000 hours|
|O-ring:||Dual NBR o-rings (lube included)|
|Disclaimer:||Avoid using this Sea Dragon light above water for prolonged periods of time
The light is designed for underwater use and water is needed to displace heat. The metal light head at full power will reach temperature of about 140F (60C) degrees within a few minutes, which may cause burning if touched. A thermal sensor will automatically dim the light if internal temperatures reaches 150F (65C) degrees. Immediately turn off light if any parts of the light become hot to the touch.